How to Use a Satellite Finder

A satellite discoverer meter is a specific gadget intended to enable you to position your satellite dish to get the most grounded motion for best TV gathering. They are easy to work and are intended to be utilized while you're at the satellite dish so you don't need to check your flag quality at your TV. There are both simple and advanced models accessible, both with and without interior power supplies.

Step 1

Associate one end of the coaxial link to the barrel connector on the satellite dish's low clamor square downconverter (LNB) and the flip side to the satellite discoverer meter. The LNB is the arm that faces the reflector dish.

Step 2

Relax the nuts that enable the dish to be balanced both along the level (azimuth) and vertical (height) planes.

Step 3

Move the dish from side to side along the even plane until the point that you decide the position at which the satellite discoverer meter shows greatest flag quality.

Step 4

In case you're utilizing a simple meter, you will discover this position in increases. In the first place, modify the pick up handle so the meter's needle peruses half quality. As you draw the dish nearer to its ideal position, the meter may surpass greatest. In the event that this happens, straighten out the pick up lower and keep on moving the dish until the point that you decide the position where most extreme flag quality is gotten.

Step 5

Raise and lower the dish along the vertical plane until the point when you decide the rise at which the satellite discoverer meter shows greatest flag quality. In the event that utilizing a simple meter, you may need to alter the pick up as in the past stride.

Step 6

Fix the nuts to bolt your satellite dish into put.

Step 7

Separate the coaxial link from the LNB on the satellite dish.